Meßgeräte (IOtech, USA)

Data Acquisition (DAQ), Data Loggers
IEEE 488 (GPIB) Interfaces
Software for Data Acquisition

eZ-Analyst™

Real-Time Vibration and Acoustic Analysis Software for the ZonicBook™ and WaveBook™. eZ-Analyst software with the ZonicBook or WaveBook is a complete vibration data acquisition and analysis package.

• Real-time FFT analysis
• Easy-to-use graphical user interface provides fast setup
• Field expandable from 8 to 56 channels
• Supports four separate tachometer channels
• View all functions simultaneously in eight display windows with up to 16 data overlays in each window
• Export your data to Excel, ME Scope, SMS Star, or UFF type 58 ASCII or Binary
• Wide selection of real-time analysis features, including integration/differentiation synchronous averaging, and much more

eZ-Rotate™ & eZ-RotatePlus™

Rotating Machinery Vibration Analysis Software for the ZonicBook™ and WaveBook™.

eZ-Rotate software provides comprehensive post-acquisition analysis of vibration data acquired from rotating machinery using IOtech’s ZonicBook™ and WaveBook™ measurement hardware. eZ-Rotate makes it easy to view, analyze, and create reports on previously recorded data, including computed order tracking, waterfall graphs, contour plotting, and much more.

eZ-Rotate works seamlessly with Microsoft Office® documents, making it easy to copy plots and data directly into reports using Word® or Excel®. eZ-RotatePlus offers all of the features of eZ-Rotate, plus advanced capabilities such as Cepstrum analysis, sideband cursors, bearing cursors, gear box and planetary gearbox cursors, and re-sampling to the angle domain to make sense of large families of harmonics such as those found in flawed bearings. Torsional analysis supports encoders and counters for non-contact measurements.

eZ-TOMAS™

Machine Vibration Monitoring Software for the ZonicBook™ and WaveBook™.

eZ-TOMAS is the economical solution to rotating machinery monitoring and analysis. eZ-TOMAS will monitor your machines on a 24 hour basis. Data is continuously acquired and limit checked. eZ-TOMAS retains the change in vibration condition and quickly provides you with the information you need to make critical decisions. eZ-TOMAS can be quickly setup to measure rotating machinery vibration data. Machine configuration and acquisition information can be copied from templates or copied from existing projects. Accessing rotating machinery displays are as simple as double-clicking on the desired input channel. eZ-TOMAS checks vibration data at both alert and alarm levels. Alarm levels can either be set by you; or eZ-TOMAS can automatically calculate alarm levels based on past machine operation. Changes in vibration levels indicate changes in a machine’s operating condition, which are warning signs of potential machine failure.

DASYLab®

Icon-Based Data Acquisition, Graphics, Control, and Analysis Software.

DASYLab® picks up where DaqView™ and WaveView™ leave off, letting you interactively develop PC-based data acquisition applications by simply attaching functional icons. DASYLab offers real-time analysis, control, and the ability to create custom graphical user interfaces (GUIs). What’s more, in contrast to other graphical programming environments, which can require weeks of training to master, DASYLab has a very short user-learning curve. Many applications can be configured in a few minutes, rather than days or weeks.

eZ-Balance™

Portable Machine Balancing Software for the ZonicBook™ and WaveBook™.

Balance your rotating machinery with eZ-Balance and the ZonicBook/618E. The combination of the ZonicBook/618E with eZ-Balance provides a powerful system for multi-plane (up to 7 planes) balancing applications. eZ-Balance computes the optimal balance weights and their locations, based on vibration data collected from the ZonicBook/618E. The data is displayed in a convenient Polar plot that indicates the magnitude and phase of the unbalance as well as time and spectrum data.

eZ-FrequencyView™

Post-Acquisition Analysis Software.

Like eZ-PostView™, eZ-FrequencyView™ is supported with all IOtech data acquisition View packages and is automatically integrated into your View application when you install it.
eZ-FrequencyView adds powerful frequency domain display and analysis for just about any frequency domain application. Both single channel and cross channels are supported as well as function displays for spectrum, auto spectrum, PSD, and strip chart. For sound and acoustical applications, both full and 1/3 octaves are supported.

eZ-TimeView™

Post-Acquisition Analysis Software.

Like eZ-PostView™, eZ-TimeView™ is supported with all IOtech data acquisition View packages.

Acquired data can be played back in real-time or in single sampled data point increments. The strip chart feature allows easy to use data scrolling as well as scaling of the data by the user. Areas of interest can also be zoomed in via mouse movement on the time axis or by a zoom box which allows zooming in on both the time and the magnitude axis simultaneously. Searches can be performed on min or max peak data.
eZ-TimeView also includes powerful calculation and statistics.

ZonicBook/618E™

Portable Vibration Analysis and Monitoring System.
The ZonicBook/618E with eZ-Series software and your PC makes a real-time, portable vibration analysis monitoring system.

• 8 dynamic input channels, expandable up to 56 channels
• 4 tachometer channels for rotational measurements
• High-speed Ethernet connection to the PC for continuous recording
• Five eZ-Series software packages address a wide variety of vibration monitoring and analysis applications
• TEDS support

WaveBook/516E™

Ethernet-Based Portable High-Speed Waveform Acquisition. The WaveBook/516E is ideal for measuring dynamic signals in portable and laboratory applications.

• 16-bit/1-MHz A/D
• 1 µs/channel scanning of any combination of channels
• Single and multichannel analog triggering with programmable level and slope
• Programmable pre- and post-trigger sampling rates
• Sixteen digital inputs can be scanned synchronously with analog signals
• Expandable up to 288 high-speed channels
• Add up to 854 lower-speed thermocouple channels

eZ-NDT™

Resonant Inspection System for the ZonicBook™. Product quality can be measured and recorded using eZ-NDT.

• Provides inspection of metal, ceramic, and hard plastic parts
• Removes the ambiguity that is common in other inspection systems
• Requires no parts preparation, making the test fast and inexpensive
• Tests parts in less than 2 seconds
• Quantifies and documents the first natural frequency for end-user comparison to final assembly resonant frequencies

IOtech’s eZ-NDT (non-destructive test) systems provide a fast and inexpensive method of 100% inspection of production parts, such as powder metal, ceramics, and composites. eZ-NDT uses acoustic analysis to identify part variations that are caused by process inconsistencies and defects.
eZ-NDT systems apply acoustic energy to your part, monitor its acoustic response, and analyze its resonant frequencies. It then compares the results to the acoustic signature of a known-good part stored in its library. The test takes less than two seconds and requires no special tooling, dyes, chemicals, cleaning, magnetization, or expensive and time consuming visual inspection equipment.

LogBooks™

Stand-Alone, Intelligent PC-Based Data Acquisition Systems Models /300, /360. The LogBook/360 data acquisition system includes an expansion bay for up to three signal conditioning cards.

• Operates without a PC at the test site 16-bit, 100-kHz analog and digital sampling
• Compact yet expandable architecture can accommodate over 400 channels of analog, digital, and frequency I/O
• Stand-alone nonvolatile storage of over 500 million samples via removable PC-Card memory
• Card swapping and uploading during acquisition allows continuous data acquisition
• Communication with PC via RS-232, parallel port, modem, or by transporting a PC-Card; optional RS-422 interface

Micro488A™

Serial/IEEE 488 Controller Micro488A converts any computer with a serial port into a full-featured IEEE controller.
Enables control of up to 14 IEEE devices from any computer with an RS-232 or RS-422 port. Built-in 32,000 character data buffer. Supports baud rates up to 57,600 baud. OEM board-level version available.

Personal488/CARD™

IEEE 488.2 PC-Card Interface, Cable, and Software for Notebook and Desktop PCs. The Personal488/CARD provides an IEEE 488.2 PC-Card interface for notebook & desktop PCs.

• Provides 600 Kbytes/s data transfer
• Complies with PC-Card Standard Specification 2.1
• Type II (5 mm) compatible PC-Card
• Includes Windows® drivers
• Controls up to 14 instruments

Personal488/PCI™

1 Mbyte/s PCI/IEEE 488.2 Board with Plug and Play, Digital I/O, and Software for PCs. Personal488/PCI provides IEEE 488.2 one Mbyte/s data transfer and plug-and-play installation.

• Features PCI local bus compatibility
• Provides 1 Mbyte/s data transfer
• Features plug-and-play
• Offers full IEEE 488.2 support
• Includes Windows® drivers
• Easily programmable via familiar HP-style commands
• Functions as PCI bus master
• Provides 8-channels of general-purpose digital I/O

ADC488/16A™ & ADC488/8SA™

IEEE 488 A/D Converters with Digital I/O and Simultaneous Sample & Hold. ADC488/16A provides many of the features found in expensive digital oscilloscopes.

• Provides 16-bit A/D conversion at up to 100,000 samples/s
• Offers 16 single-ended or 8 differential analog inputs, expandable using master/slave configuration
• Provides ±1, ±2, ±5, and ±10 VFS programmable input ranges
• Features continuous throughput to the IEEE 488 bus at 200 Kbytes/s (100,000 16-bit readings/s)
• Offers memory expansion up to 8 Mbytes (4 Msamples)
• Analog inputs isolated from ground by 500 VCM
• Includes eight TTL-compatible digital inputs and eight TTL digital outputs
• LabVIEW® examples available

TempScan/1100™ & MultiScan/1200™

High-Speed Temperature & Voltage Scanning Instruments. The TempScan/1100 and MultiScan/1200 offer high-speed temperature and voltage measurement in compact, 19-in. rack-mountable enclosures.
IEEE 488 and RS-232/422 interfaces. 32 TTL digital alarm outputs and 8 TTL-compatible digital inputs. 128 Kreadings of memory, expandable up to 4 Mreadings. Built-in real-time clock.
TempScan/1100™: Measures thermocouples, volts, and RTDs at up to 960 channels/s. Accepts optional scanning modules for measuring thermocouples, RTDs, or DC volts.
MultiScan/1200™: Measures isolated temperature, DC volts, AC volts, and waveforms in one compact instrument. Scans thermocouples and DC volts at up to 147 channels/s. Single-channel burst mode for digitizing waveforms at rates up to 20 kHz.

DAC488HR/4™

16-bit D/A Converter with Digital I/O and IEEE 488. The versatile DAC488HR functions as a voltage source, function generator, and an arbitrary waveform generator.

• Four isolated 16-bit outputs
• 100-kHz/channel update rate
• 480 Ksamples/channel max buffer
• ±1, ±2, ±5, and ±10 VFS programmable unipolar and bipolar output ranges
• One-shot, step, burst, waveform, and continuous output modes
• LabVIEW® examples available

Digital488/80A™

80-Bit IEEE 488/Digital I/O Interface. The Digital488/80A provides an economical link between an IEEE controller and digital signals.

Digital488™

40-Bit IEEE 488 Interface. Digital488 provides an economical link between an IEEE controller and digital signals.
Add TTL-level digital input and output capability to IEEE 488 based systems. Offer 40 I/O lines, software programmable as inputs or outputs in 8-bit groups. Convert I/O data to one of five selectable formats and send it to the controller.

DaqScan/2000™

Series Ethernet-Based Data Acquisition System Components.

• Adds analog I/O, digital I/O and frequency I/O to Ethernet-based test systems
• All I/O can be synchronous, enabling precise timing between various I/O functions
• 8 differential, or 16 single-ended inputs, expandable up to 256 voltage or 896 TC channels using signal conditioning and expansion options
• Up to 40 built-in TTL-level digital I/O, expandable up to 256 channels of isolated I/O using low-cost isolation modules
• Convenient 1U high 19” rack mount package minimizes rack space in test systems

DaqBoard/1000

IOtech PCI and CompactPCI Data Acquisition Daq Board.

• PCI Boards
• 16-bit resolution
• 200-kHz sampling
• Includes support for Visual Basic®, C/C++, ActiveX/COM, Linux, LabVIEW®, and MATLAB®