|
|
 |
TRC50,
Curve Tracer
The curve displayed on the screen shows
component performances The Curve Tracer
is an essential tool for troubleshooting
circuits and testing components. The TRC500
is very useful in the early stages of failure
analysis. It can identify electrical failures
that exhibit abnormal voltage-current relationships
at the output pins.
Field of Application
- Research laboratory
- Production facility
- Maintenance laboratory
- Quality control department
- College & University electronic teaching
Field of Application
TRC50.pdf
|
 |
CS328
2-Ch analog, 10-bit, 100MS/s, A/D + 8 Digital
Channel, 100MS/s + 1 signal generator 10MHz
USB 2.0
- 2 Channels, 10 bits, 100MS/s simultaneously
- 8 digital inputs sampling at 100MS/s
- 1 Signal generator 50MS/s
- 4 MSamples Storage
A Very low-cost solution!
|
 |
CubeScope-20,
12-bit, 20MS/s Mixed PC Based Oscilloscope
- Oscilloscope: 2-Ch, 20 MS/s, 12-bit
resolution, up to 8MS
- Arbitrary Waveform Generator: 2-Ch,
20MS/s or 1-Ch, 40MS/s, 12-bit resolution,
up to 8MS
- Logic Analyzer: 16-Ch, 25MHz, up to
8MS
- AcquiFlex Software included
- Open PC Platform PC base with Windows
XP, 512MB RAM, 40GB Hard Drive,CD-R Drive
Small Footprint/Lightweight
|
 |
CH
Series High Speed Multifunction Board for
PCI bus
Acquitek introduces low-cost data acquisition
boards for PCI bus. The CH Series provide
two analog input channels, 20MS/s, 12 bits,
two analog output, 20MS/s, 12 bits, 16 digital
I/O, 16MB memory, 2 counter/timer and an onboard
DSP.
|
 |
CM
Series Multifunction Board for PCI bus
Acquitek introduces low-cost data acquisition
boards for PCI bus. The CM Series provide
16/32 analog inputs, 16 bits, up to 1MS/s,
two analog output, 1MS/s, 16 bits, 16/32 digital
I/O, 3 counter/timers, 16MB memory and an
onboard DSP.
|
 |
AWG1000,
1.0GS/s, 12 bits, Arbitrary Waveform Generator
• 1.0 GS/s, 12-bit vertical resolution
• Single full size PCI compliant card
• SFDR less than -50 dB at 100 MHz
• Full scale Trise/Tfall = 260 psec typical
• Program up to 32K independent segments
• Program up to 16K loops/segment
• 4 MS memory standard
• 8 TTL marker outputs standard
• Synchronous trigger input
|
 |
Handyscope-HS3
- Storage Oscilloscope
- Spectrum Analyzer
- Transient Recorder
- Arbitrary Waveform Generator
- Multimeter
The Handyscope-HS3 is a powerful computer
controlled measuring instrument that consists
of four measuring instruments: a Multimeter,
Oscilloscope, Spectrum analyzer and Transient
recorder. Also an AWG (Arbitrary Waveform
Generator) is available. This new powerful
and compact measuring instrument can solve
almost every measurement problem.
|
| |
Andere
Meßgeräte Acquitek |
| |
|
Real-Time Vibration and
Acoustic Analysis. Rotating Machinery Vibration
Analysis.
Machine Vibration Monitoring. Data Acquisition.
Vibration Analysis and Monitoring System
Ethernet-Based Portable High-Speed Waveform
Acquisition.
|
|
|
DaqScan/2000™
Series Ethernet-Based Data Acquisition System
Components.
- Adds analog I/O, digital I/O and frequency
I/O to Ethernet-based test systems
- All I/O can be synchronous, enabling
precise timing between various I/O functions
- 8 differential, or 16 single-ended inputs
using signal conditioning and expansion
options
- Up to 40 built-in TTL-level digital
I/O
|
 |
ZonicBook/618E™
Portable Vibration Analysis and Monitoring
System.
The ZonicBook/618E with eZ-Series software
and your PC makes a real-time, portable
vibration analysis monitoring system.
- 8 dynamic input channels, expandable
up to 56 channels
- 4 tachometer channels for rotational
measurements
- High-speed Ethernet connection to the
PC for continuous recording
|
 |
WaveBook/516E™
Ethernet-Based Portable High-Speed Waveform
Acquisition. The WaveBook/516E is ideal
for measuring dynamic signals in portable
and laboratory applications.
- 16-bit/1-MHz A/D
- Single and multichannel analog triggering
with programmable level and slope
- Programmable pre- and post-trigger sampling
rates
- Sixteen digital inputs can be scanned
synchronously with analog signals
|
 |
LogBooks™
Stand-Alone, Intelligent PC-Based Data
Acquisition Systems Models /300, /360. The
LogBook/360 data acquisition system includes
an expansion bay for up to three signal
conditioning cards.
- Operates without a PC at the test site
16-bit, 100-kHz analog and digital sampling
- Compact yet expandable architecture
can accommodate over 400 channels of analog,
digital, and frequency I/O
- Stand-alone nonvolatile storage of over
500 million samples via removable PC-Card
memory
|
 |
Micro488/p™
Miniature Serial/IEEE 488 Controller. The
low-cost Micro488/p enables IEEE 488 control
from any computer equipped with a serial port.
Smallest serial to IEEE 488 controller available.
Controls up to eight IEEE 488 instruments.
Programmed with concise ASCII commands. Requires
no external power supply—powered from the
computer’s serial port. Features standard
DB25 serial and IEEE 488 connectors. Enables
remote control of IEEE 488 instruments. Easily
connects to notebook PCs.
|
 |
Personal488/PCI™
1 Mbyte/s PCI/IEEE 488.2 Board with Plug
and Play, Digital I/O, and Software for
PCs. Personal488/PCI provides IEEE 488.2
one Mbyte/s data transfer and plug-and-play
installation.
- Features PCI local bus compatibility
- Provides 1 Mbyte/s data transfer
- Features plug-and-play
- Offers full IEEE 488.2 support
- Includes Windows® drivers
- Easily programmable via familiar HP-style
commands
- Provides 8-channels of general-purpose
digital I/O
|
| |
Andere Meßgeräte IOtech |
| |
Meßgeräte
GaGe
(Kanada)
|
 |
CompuScope
12400
New 12 bit, 400 MS/s PCI bus digitizer
for precision signal capture
- 200 MS/s sampling on 2 synchronous channels
- 400 MS/s on one channel
- 12 bits nominal resolution
- 200 MHz bandwidth· Full-size, single-slot
PCI card
- Up to 4 Gigabytes of on-board acquisition
memory
- Full-featured, software-controlled front-end
- 32 bits, 66 MHz PCI standard for 200 MB/s
transfer to PC memory
|
 |
CompuScope
3200
32 Bit, 100 MHz Digital Input Card for
PCI Bus
Capture 32 Bits of Digital Data. 100 MHz Clock
Rates.
Software Configurable to provide 8, 16, or
32 Bits.
Up to 2 GB of On-Board Acquisition Memory.
Multi-Card Systems providing wider input words
of 64, 96, or 128 Bits. CMOS or ECL/PECL data
inputs.
Software Development Kits for C/C++, MATLAB,
LabVIEW under Windows 95/98/ME and Windows
NT/2000/XP.
|
 |
CompuScope
82G 2 GS/s, 8 Bit Waveform Digitizer for
PCI Bus
CompuScope 82G is a single slot, PCI bus
card capable of performing 8 bit A/D conversion
at sampling rates up to 2 GS/s in one-channel
mode and 1 GS/s in dual channel simultaneous
mode. The CS82G uses two monolithic A/D
converters each running at 1 GS/s. In single-channel
mode the two ADCs are clocked in a "ping-pong"
mode to achieve up to 2 GS/s sampling. In
dual channel mode, the two ADCs are clocked
absolutely simultaneously to provide coherent
sampling.
|
| |
Andere
Meßgeräte GaGe
|
| |
|
|
|
 |
ETC
Measuring LAB II
The EMLII (ETC Measuring Lab II) is a second
generation of measuring devices from ETC company.
The devices in this family features great
price/performance ratio. All devices of this
family are CE certified.
The EMLII contains:
M621 - 150MHz Digital Storage Oscilloscope
M611 - Logic Analyzer
M631 - Aribtrary Waveform Generator
|
 |
The
M520 Oscilloscope Series belongs
to the ETC Measuring Lab 3 (EML3) line and
offers a wide range of devices. It provides
a customer with a possibility to select
a device perfectly fitting his or her needs
offering the best performance/cost ratio.
All devices of the M520 Oscilloscope Series
offer extremely simple and intuitive installation
and operation, can adapt to any screen resolution
(from 800 x 600 pixels upwards). They are
powered directly from the USB interface.
- Frequency response of vertical amplifiers
60/150MHz
- Max. realtime sampling frequency 50/200MS/s
- Max. equivalent sampling frequency 5/
20GS/s
- Size of storage for each channel 4/8K
|
 |
M611
Logic Analyzer
The ETC M611 Logic analyzer is a package,
which will together with PC create 32 channel
logic analyzer with sampling rate up to 100MHz.
Maximum length of record is 524280 of 32-bit
words.
32 channel logic analyzer
Sampling rate up to 100MHz
Length of record 524280 of 32-bit words.
Software for measuring and later data analysis
Connected to PC via parallel port (EPP) or
USB
|
 |
M221
100MHz Digital Storage Oscilloscope
ETC M221 is a package that turns your PC compatible
computer into a dual channel (four-channel)
digital storage oscilloscope with the 100
MHz bandwidth. The oscilloscope uses the 16-bit
ISA bus add-on card EM221 for data acquisition
and the Scope software for processing. Together
it creates a very user-friendly environment,
where all controls are easy-to-access either
by mouse or other pointing device. A user,
who is used to operate a standard oscilloscope,
will master the M221 in a very short period
of time.
|
 |
M321
Arbitrary Waveform Generator
ETC M321 is a package that turns your PC compatible
computer into a 2-channel arbitrary generator.
This device consists of the EM321 ISA bus
add-on card and a software, using which you
can easily control the device. All generator
functions are easy-to-control by mouse. Besides
standard waveform types (sine wave, saw, triangle,
rectangle), that are already implemented and
ready to use, it is possible to define or
create desired waveform by using the built-in
powerful waveform editor by either entering
a mathematical expression or simply drawing
a waveform by mouse. You can set a waveform
shape and amplitude independently for each
channel.
|
| |
Andere
Meßgeräte ETC |
| |
|
|
|
| |
|
 |
Digital
oscilloscope BORDO 221
Sampling rate is upto 100 MHz, equivalent
sampling rate-upto 20 GHz; two independent
channels; resolution: 10 bit; bandwidth: 150
MHz; onboard memory: 64 K; analog input of
external triggering; PCI bus; software for
Windows95/98/ME/NT/2000/XP.
|
 |
Waveform
generator GSPF-052
Waveform generator GSPF-052 is a functional/arbitrary
waveform source which is used for automatic
research tuning and testing devices and systems
in industry science and education.
Frequency range DC: 23MHz...10MHz; high accuracy
of amplitude and frequency setting; low level
distortion ( less than 0,1%); output waveform
amplitude: +/- 5V on 50 Ohm.
|
 |
Functional/Arbitrary
waveform generator AGENT B230
The waveforms are standard; the beforehand
captured signals are rendered; sampling rate
is upto 100 MHz; DAC resolution is 14 bit;
onboard memory: 64 Kb; output voltage range:
+/- 8V, +/-3V; autocalibration on duty; analog
I/O of external triggering; function of voltage
meter and frequency meter; software for Windows95/98/NT/2000/XP;
PCI bus.
|
pci.jpg) |
Analog/digital
conversion card for PCI - n10M6PCI
Sampling rate: up to 100 MHz; mode of sampling
rate task-setting - fixed frequency of a quartz
generator; bandwidth: 50MHz; ADC resolution:
8 bit; speed of conversion: 20 ns; onboard
memory; two single-ended inputs for analog
signals; analog inputs and external trigger
inputs can be either single-ended or differential.
|
 |
Card
ADC 1,5PCI-14
ADC: resolution: 14 bit; conversion time:
2,5 ms; 32 single-ended channels or 16 differential
channels; input resistance is more than
100 MOhm; switchable input voltage ranges
of the ADC: ± 10V, ± 5V, ± 2,5V, ± 1V, ±
0,5V, ± 0,25V, ± 0,1V, ± 0,05V (for each
channel); buffer memory of FIFO type, 2048
Words; 16 digital lines: 8 - input and 8
- output.
|
| |
Andere
Meßgeräte Signal
|
