Mēraparatūra
(GaGe, Kanada)
Digital
Input / Output, High Speed Waveform Digitizer,
Arbitrary Waveform Generators
|
 |
CompuScope
14200 200 MS/s, 14 Bit Waveform Digitizer
for PCI Bus
Gage Applied expands its on-board memory
range on the CS14200 High Speed Digitizer
CS14200, 14 bits, 2 Channels, 200MS/s each.
Now available up to 2GS (4Gbytes) on one
single PCI slot!
|
 |
CompuScope
12400
New 12 bit, 400 MS/s PCI bus digitizer
for precision signal capture
- 200 MS/s sampling on 2 synchronous channels
- 400 MS/s on one channel
- 12 bits nominal resolution
- 200 MHz bandwidth· Full-size, single-slot
PCI card
- Up to 4 Gigabytes of on-board acquisition
memory
- Full-featured, software-controlled front-end
- 32 bits, 66 MHz PCI standard for 200 MB/s
transfer to PC memory
|
 |
CompuScope
3200
32 Bit, 100 MHz Digital Input Card for
PCI Bus
Capture 32 Bits of Digital Data. 100 MHz Clock
Rates.
Software Configurable to provide 8, 16, or
32 Bits.
Up to 2 GB of On-Board Acquisition Memory.
Multi-Card Systems providing wider input words
of 64, 96, or 128 Bits. CMOS or ECL/PECL data
inputs.
Software Development Kits for C/C++, MATLAB,
LabVIEW under Windows 95/98/ME and Windows
NT/2000/XP.
|
 |
CompuGen
3250
32 Bit, 50 MHz Digital Output Card
32 Bit Digital Output. 50 MHz Clock Rate.
Up to 8 Meg x 32 On-Board Pattern Memory.
Crystal-Based Clock Source.
One-Shot, Multi-Shot or Endless Looping of
Digital Patterns
Up to 256 Bit Output Using an 8 Card Master/Slave
System
Free GageBit Software Allows Creating and
Editing of Digital Patterns. Software Development
Kits for C/C++, MATLAB and LabVIEW.
|
 |
CompuGen
1100 12 Bit, 80 MS/s Analog Output (D/A)
Card
Traditional waveform generators provide
simple, periodic waveforms appropriate for
audio and RF applications. The complex analog
and digital circuits of today require the
stimuli to be customized. CompuGen 1100
enables the user to create a large number
of varying analog and digital outputs and
store them for future reference. ISA slot.
|
| |
8/16
channels, 500 kHz DAC/Waveform Generator
The V285 is a single-width, C-size, register-based,
VXIbus module that is a 16-bit, precision,
arbitrary waveform generator. It includes
a DAC per channel and is cap able of update
rates to 500 kHz per channel. Each analog
channel includes a 4-pole, Bessel filter
with programmable cutoff frequencies of
10 kHz and 100 kHz. A 16-bit ADC/multiplexer
allows all channels to be automatically
tested and calibrated.
|
 |
CompuScope
82G 2 GS/s, 8 Bit Waveform Digitizer for
PCI Bus
CompuScope 82G is a single slot, PCI bus
card capable of performing 8 bit A/D conversion
at sampling rates up to 2 GS/s in one-channel
mode and 1 GS/s in dual channel simultaneous
mode. The CS82G uses two monolithic A/D
converters each running at 1 GS/s. In single-channel
mode the two ADCs are clocked in a "ping-pong"
mode to achieve up to 2 GS/s sampling. In
dual channel mode, the two ADCs are clocked
absolutely simultaneously to provide coherent
sampling.
|
 |
CompuScope
1610 10 MS/s, 16 Bit Waveform Digitizer
for PCI Bus
A CompuScope 1610 card for PCI bus can
simultaneously sample two analog signals
at speeds up to 10 MS/s with 16 bit resolution
and store the data in the on-board memory.
CompuScope 1610 uses state-of-the-art data
conversion technology to provide dual-channel
simultaneous sampling rate of 10 MS/s with
16 bit resolution. Each channel has its
own ADC chip, eliminating the need for multiplexing
the inputs which invariably results in increased
noise and lower performance.
|
