Print Print Close

GSM/SMS Remote Control Module
BieneRemote8535U (OEM)



BieneRemote8535U (OEM)

  • Command and data transmission - GSM/SMS
  • Supported cell phone -
    Siemens C35i, S35i, M35i, C45, S45 (GSM 900/1800)
    Siemens C60 (GSM 900/1800/1900)
  • Inputs - 12 (4)
  • Outputs - 7 (4)
  • All I/O pins connected to two 2x13 pin header for easy external connections
  • 4 Inputs connected through transistor driver to terminal blocks
  • 4 Outputs connected through relay driver to terminal blocks
  • 2x13 pin header orientation - UP
  • Board dimension 68x62mm

 
 
BieneRemote8535U
Microcontroller
Atmel AVR ATmega8535
Firmware
yes
Cell phone
Siemens C35i, S35i, M35i, C45, S45 (GSM 900/1800)
Siemens C60 (GSM 900/1800/1900)
Command transmission
GSM channel, SMS message
Data transmission
GSM channel, SMS message
Commands
20
Inputs
12
Input (pin header)
12; "0" - 0..1V, "1" - 3..5V
Input (Terminal Block)
4; "0": 0..1V; "1":1.5..12V (without limited resistor)
Analog inputs
4 (optional)
Outputs
7
Output (pin header)
7; "0" - 0..0.5V, "1" - 3..5V
Output (Terminal Block)
4; (open collector, 50V max, 350/500mA max)
Pin header orientation
Up
Reset button
yes
Power supply
9 - 12 VDC
Power requirement
30mA / 180mA (cell phone charge mode)
Box
no
Board dimension
68x62mm

BieneRemote8535 firmware version

  standard -Ni1000 -analog
Control commands 20 20 20
Controlled outputs 7 3 7
Alarm siren output yes no no
Max event inputs 8 7 7
Analog inputs - 4 4
ADC resolution, bits - - 10
Temperature control no yes no
Readable input status yes no yes
Readable digital inputs 12 - 8
Readable temperature no yes no
Readable analog data no no yes
Readable analog inputs - - 4
SMS message format for status I=111111111111
O=10000000
CH=100% 		Ti=21
Te=14
CH=100% 		I=FF O=80 CH=100%
SMS message format for analog data - - A4=3FF A5=3FF
A6=3FF A7=3FF


Home Automation control via SMS message.
You can receive text messages with the occurrence of an event automatically to GSM mobile (cell) phones. You can transmit command messages and switches the output - switch on/off remote equipment.

You can receive SMS messages at occurrence of the certain events - operation of entrance sensors. You can send SMS messages for management of the various equipment (the conditioner, the heating equipment).

Features

  • GSM receiver and transmitter - Cell Phone
  • Event notification via SMS
  • Remote supervision via SMS
  • Embedded Software
  • Change Message without Software change
  • Program support of process of charge of a mobile phone
  • Read Input Status function
  • Read analog Inputs (optional)
  • Low cost

Applications (home, garage, office, car, etc) :

  • Alarm systems (door opened, water or gas leak, etc)
  • Remote control (heater, air conditioned, etc)
  • Monitoring




www.bieneelectronics.com