BieneControlMicro16 (OEM)

A 40-pin extended (35.56mm) DIL-40 board based on Atmel AVR ATmega16 microcontroller. The board contains a 16Kbytes flash EEPROM, 1024 bytes SRAM, 512 bytes EEPROM, 8Kbytes serial ferromagnetic RAM, resonator, serial and SPI interface connectors.
The board has 30 I/O pins. Each I/O pin is capable of delivering output current of up to 20mA.

• 8-bit RISC microcontroller Atmel AVR ATmega16
• 16 Kbytes in system reprogrammable Flash EPROM
• 1024 bytes internal SRAM
• 512 byte internal EEPROM
• 8 Kbytes serial ferromagnetic RAM
• Running at 16Mhz, allowing up to 16 MIPS (million-instructions-per-second)
• 30 free I/O ports
• Easy to use with two operation modes (Program Store and Run)
• SPI interface
• ISP interface (for in-system programming)
• JTAG interface (for in-system programming on chip debug)
• Two wire serial interface (I2C)
• RS232 serial port (TTL 3V)
• 4-pin serial MICRO-MATCH connector (serial interface)
• 6-pin header standard ISP connector
• 8 channel 10-bit ADC
• Analog comparator
• Oscillator: 16MHz
• Single +5V supply
• Board dimension 50.8x38.1mm
• Low cost