OEM Control Module BieneControlMicro16
and BieneControlMicro128
BieneControlMicro16: A
40-pin extended (35.56mm) DIL-40 board based on
Atmel AVR ATmega16 microcontroller. The board
contains a 16 Kbytes Flash EEPROM, 1024 bytes
SRAM, 512 bytes EEPROM, 8Kbytes serial ferromagnetic
RAM, resonator, serial and SPI interface connectors.
The board has 30 I/O pins. Each I/O pin is capable
of delivering output current of up to 20mA.
BieneControlMicro128: A 48-pin extended
(35.56mm) DIL-48 board based on Atmel AVR ATmega128
microcontroller. The board contains a 128 Kbytes
Flash EEPROM, 4+32 Kbytes SRAM, 4 Kbytes EEPROM,
8 Kbytes serial ferromagnetic RAM, resonator,
two serial and SPI interface connectors. The board
has 28 I/O pins. Each I/O pin is capable of delivering
output current of up to 20mA.
| pin |
function |
|
pin |
function |
|
| 1 |
Reset/ |
|
48 |
VCC |
|
| 2 |
PB0 (SS/) |
i/o |
47 |
PE7 |
i/o |
| 3 |
PB1 (SCK) |
i/o |
46 |
PE6 |
i/o |
| 4 |
PB2 (MOSI) |
i/o |
45 |
PE5 |
i/o |
| 5 |
PB3 (MISO) |
i/o |
44 |
PE4 |
i/o |
| 6 |
PB4 |
i/o |
43 |
PE3 |
i/o |
| 7 |
PB5 |
i/o |
42 |
PE2 |
i/o |
| 8 |
PB6 |
i/o |
41 |
PE1 (TXD0) |
out |
| 9 |
PB7 |
i/o |
40 |
PE0 (RXD0) |
inp |
| 10 |
PD0 (SCL) |
i/o |
39 |
AVCC |
|
| 11 |
PD1 (SDA) |
i/o |
38 |
AREF |
|
| 12 |
PD2 (RXD1) |
inp |
37 |
GND |
|
| 13 |
PD3 (TXD1) |
out |
36 |
PF0 (ADC0) |
i/o |
| 14 |
PD4 |
i/o |
35 |
PF1 (ADC1) |
i/o |
| 15 |
PD5 |
i/o |
34 |
PF2 (ADC2) |
i/o |
| 16 |
PD6 |
i/o |
33 |
PF3 (ADC3) |
i/o |
| 17 |
PD7 |
i/o |
32 |
PF4 (ADC4/TCK) |
i/o |
| 18 |
PG0 (WR/)
* |
|
31 |
PF5 (ADC5/TMS) |
i/o |
| 19 |
PG1 (RD/)
* |
|
30 |
PF6 (ADC6/TDO) |
i/o |
| 20 |
PC0 (A8)
* |
|
29 |
PF7 (ADC7/TDI) |
i/o |
| 21 |
PC1 (A9)
* |
|
28 |
PC7 (A15)
* |
|
| 22 |
PC2 (A10)
* |
|
27 |
PC6 (A14)
* |
|
| 23 |
PC3 (A11)
* |
|
26 |
PC5 (A13)
* |
|
| 24 |
GND |
|
25 |
PC4 (A12)
* |
|
|
BieneControlMicro128
(OEM)
- 8-bit RISC microcontroller
Atmel AVR ATmega128
- 128 Kbytes in system
reprogrammable Flash EPROM
- 4+32 Kbytes SRAM
- 4 Kbytes EEPROM
- 8 Kbytes serial ferromagnetic RAM
- Running at 16MHz,
allowing up to 16 MIPS (million-instructions-per-second)
- 28 free I/O ports
- Easy to use with
two operation modes (Program Store and
Run)
- SPI interface
- ISP interface (for in-system programming)
- JTAG interface (for in-system programming
on chip debug)
- Two wire serial interface (I2C)
- Two RS232 serial
port (5V/3V logic)
- Two 4-pin serial MICRO-MATCH connector
(serial interface)
- 6-pin header standard ISP connector
- 10-pin header standard JTAG connector
- 8 channel 10-bit ADC
- Analog comparator
- Oscillator: 16MHz, 32.762kHz
- Single +5V supply
- Board dimension 60.96x38.1mm
- Low cost
|
| pin |
function |
|
pin |
function |
|
| 1 |
Reset/ |
inp |
40 |
VCC |
|
| 2 |
NC |
|
39 |
PB7 (SCK) |
i/o |
| 3 |
PD0 (RXD) |
inp |
38 |
PB6 (MISO) |
i/o |
| 4 |
PD1 (TXD) |
out |
37 |
PB5 (MOSI) |
i/o |
| 5 |
PD2 |
i/o |
36 |
PB4 (SS/)
|
i/o |
| 6 |
PD3 |
i/o |
35 |
PB3
|
i/o |
| 7 |
PD4 |
i/o |
34 |
PB2 |
i/o |
| 8 |
PD5 |
i/o |
33 |
PB1 |
i/o |
| 9 |
PD6 |
i/o |
32 |
PB0 |
i/o |
| 10 |
PD7 |
i/o |
31 |
PA0 (ADC0) |
i/o |
| 11 |
PC0 (SCL) |
i/o |
30 |
PA1 (ADC1) |
i/o |
| 12 |
PC1 (SDA) |
i/o |
29 |
PA2 (ADC2) |
i/o |
| 13 |
PC2 (TCK) |
i/o |
28 |
PA3 (ADC3) |
i/o |
| 14 |
PC3 (TMS) |
i/o |
27 |
PA4 (ADC4) |
i/o |
| 15 |
PC4 (TDO) |
i/o |
26 |
PA5 (ADC5) |
i/o |
| 16 |
PC5 (TDI) |
i/o |
25 |
PA6 (ADC6) |
i/o |
| 17 |
PC6 (TOSC1) |
i/o |
24 |
PA7 (ADC7) |
i/o |
| 18 |
PC7 (TOSC2) |
i/o |
23 |
GND |
|
| 19 |
NC |
|
22 |
AREF |
|
| 20 |
GND |
|
21 |
AVCC |
|
|
BieneControlMicro16 (OEM)
- 8-bit RISC microcontroller
Atmel AVR ATmega16
- 16 Kbytes in system
reprogrammable Flash EPROM
- 1024 bytes internal
SRAM
- 512 bytes internal
EEPROM
- 8 Kbytest serial ferromagnetic RAM
- Running at 8MHz (16MHz
optional), allowing up to 8 (16 optional)MIPS
(million-instructions-per-second)
- 30 free I/O ports
- Easy to use with
two operation modes (Program Store and
Run)
- SPI interface
- ISP interface (for in-system programming)
- JTAG interface (for in-system programming
on chip debug)
- Two wire serial interface (I2C)
- RS232 serial port
(5V TTL, 3V CMOS)
- 4-pin serial MICRO-MATCH connector (serial
interface)
- 6-pin header standard ISP connector
- 10-pin header standard JTAG connector
- 8 channel 10-bit ADC
- Analog comparator
- Oscillator: 16MHz
- Single +5V supply
- Board dimension 50.8x38.1mm
- Low cost
|
| |
|
