Biene Electronics. BieneControl8535U

info@bieneelectronics.com

Home

Electronic Design

Order
Contact

About us

Distributors

Feedback

Control Module BieneControl8535U

Control Module BieneControl8535U (OEM)

BieneControl8535B | BieneControl8535U | BieneControl8535D | BieneControl8535R | BieneControl8535RB
BieneRemote8535B-SSR

BieneControl8535B | BieneControl8535U | BieneControl8535D
BieneControl8535R | BieneControl8535RB

At the request of the customer we can design special firmware

BieneControl8535U (OEM)

8-bit RISC microcontroller Atmel AVR ATMEGA8535
8 Kbytes Flash EPROM, 512 bytes SRAM, 512 byte EEPROM
Running at 8Mhz, allowing up to 8 MIPS (million-instructions-per-second)
Easy to use with two operation modes ( Program Store and Run)
30 I/O ports
4 Inputs (terminal block):
0-12V
4 Outputs (terminal block): 50V max (Open collector), 500 mA peak collector current
All I/O pins connected to two IDC connectors for easy external connections
2x13 pin header orientation - UP
ISP In System Programming via computer download cable (provided)
RS232 Communication with on-board ST232
Serial TTL Port
Board dimension 68x62mm

If you have never worked with a microcontroller, our Atmel AVR ATMEGA8535 8-bit microcontroller board is an excellent choice for you. We have done our best to make our board as user friendly as possible. While it still provides the best performance with an unbeatable price in today market. Furthermore, the board can be reprogrammed as many times as you want.

	BieneControl8535U
Microcontroller	8-bit RISC microcontroller Atmel AVR ATmega8535 8 Kbytes Flash EPROM, 512 bytes SRAM, 512 byte EEPROM
Frequenze	8.0000 MHz
Firmware	no
Inputs/Outputs	30 (available for user)
Terminal block inputs	4 Inputs 0-12V
Terminal block outputs	50V max (Open collector), 500 mA peak collector current
Pin header orientation	Up
Serial TTL Port	yes (jumper selectable)
RS232	yes (jumper selectable)

Reset button	yes
Power supply	9 - 12 VDC
Power requirement	30mA
Box	no
Board dimension	68x62mm

Specifications

General
Microcontroller : Atmel AVR 8-bit RISC microcontroller ATMEGA8535L chip (8 Kbytes Flash EPROM, 512 bytes SRAM, 512 byte EEPROM)
Crystal Oscillator : 8.000MHz already installed
Speed : 8MIPS
Input/Output : 30 I/O ports available for user
4 Inputs : 0-12V (without external limited resistor)
4 Outputs : 0-50V (Open collector), 500 mA peak collector current
External power supply : from 7.5 to 12V or +5VDC
Power : +5V only operation
Power requirements : 30mA typ.
Operating temperature range : 0 to +70°C

Connectors
Jumper selectable serial port: TTL, RS-232
Serial Port : 2x5 pin IDC connector
Digital I/O Port : two 2x13 pin header (for board-to-wire connection)
2x13 pin header orientation - Up
I/O Port : terminal blocks for 4 Inputs and 4 Outputs
Programming Port: 2x5 pin header
Power : terminal block for connection with external Power Suplies

External Power Supply
Voltage Supply : +5VDC stabilized, 9VDC, 12VDC

Physical
Board Dimensions : 68x62mm
Weight :

Applications: Lab experiments, Motor controls, Alarm systems, Robotic Controls, Vending Machines, Temperature Controls, General purpose industrial and displaying applications.

If you have never worked with a microcontroller, our Atmel AVR ATMEGA8535 8-bit microcontroller board (without software) is an excellent choice for you. We have done our best to make our board as user friendly as possible. While it still provides the best performance with an unbeatable price in today market. Furthermore, the board can be reprogrammed as many times as you want. Besides, it also comes with a preprogrammed Bootloader, so that you don't have to struggle with making a startup to run your program.
The board utilises the Atmel AVR ATMEGA8535 microcontroller with 8K of In-System Flash Memory, running at 8Mhz, allowing up to 8 MIPS (million-instructions-per-second). All power supply components and main crystal is in place for the microcontroller. Connectors are provided for RS232, Cell Phone, power and all I/O pins, via standard connections and IDC connectors.

Home | | Distributors | Feedback | Contact