Control Module BieneControl8535R
(OEM)
BieneControl8535B
| BieneControl8535U
| BieneControl8535D
| BieneControl8535R
| BieneControl8535RB
BieneRemote8535B-SSR
|
BieneControl8535B
| BieneControl8535U
| BieneControl8535D
BieneControl8535R
| BieneControl8535RB
|
BieneControl8535R (OEM)
- 8-bit RISC microcontroller Atmel AVR
ATMEGA8535
- 8 Kbytes Flash EPROM, 512 bytes SRAM,
512 byte EEPROM
- Running at 8Mhz, allowing up to 8 MIPS
(million-instructions-per-second)
- Easy to use with two operation modes
( Program Store and Run)
- 12 opto-isolated input channels
- 7 single-pole, double-throw relays output
channels
- All I/O connected to terminal block
- ISP In System Programming via computer
download cable (provided)
- RS232 Communication with on-board ST232
- Serial TTL Port
- Board dimension 98x148mm
If you have never worked with
a microcontroller, our Atmel AVR ATMEGA8535
8-bit microcontroller board is an excellent
choice for you. We have done our best to
make our board as user friendly as possible.
While it still provides the best performance
with an unbeatable price in today market.
Furthermore, the board can be reprogrammed
as many times as you want.
|
|
|
BieneControl8535R |
Microcontroller
|
8-bit RISC microcontroller Atmel AVR ATmega8535
8 Kbytes Flash EPROM, 512 bytes SRAM, 512
byte EEPROM
|
| Frequenze |
8.0000
MHz |
| Firmware |
no |
| Inputs |
12 opto-isolated input channels
VIL : <0.8VDC, VIH : Between +2VDC and +12VDC,
Iinp : 30mA max (540/270om limited resistor)
|
| Inputs isolation |
3750V
optically isolation |
| Input indication |
12
red LED indicators to monitor input logic
status
Logic "1" : LED On (red), Logic
"0" : LED Off |
| Outputs |
7
single-pole, double-throw relays
120VAC/0.5A or 24VDC/1A maximum contact rating
Nornal closed, normal open and common connects
|
| Relay Type |
Electromechanical
DIP Relay |
| Relay outputs |
SPDT
(with NO and NC contacts) |
| Maximum switching
voltage and current |
120VAC;
24VDC; 1A |
| Output isolation |
400
VAC or DC |
| Output indication |
7
green LEDs indicate status of output channels
Logic "1" : green LED On and Relay
On
Logic "0" : green LED Off and Relay
Off |
| Inputs/Outputs |
On-board
screw terminals for easy wiring |
| Serial TTL Port
|
yes
(jumper selectable) |
| RS232 |
yes (jumper selectable) |
| |
|
| Jumper |
Jampers
to allow individual optoisolation circuits
to be selectively bypassed and their digital
I/O lines to be brought directly to the connector
|
| Reset button |
yes |
| Power supply |
9 - 12 VDC |
| Power requirement
|
300mA max (all relays active) |
| Board dimension |
98x148 mm |
Specifications BieneControl8535D
General
Microcontroller : Atmel AVR 8-bit RISC microcontroller
ATMEGA8535L chip (8 Kbytes Flash EPROM, 512 bytes
SRAM, 512 byte EEPROM)
Crystal Oscillator : 8.000MHz already installed
Speed : 8MIPS
Input/Output : 30 I/O ports available for
user
4 Inputs : 0-12V
4 Outputs : 0-50V (Open collector), 500
mA peak collector current
External power supply : from 7.5 to 12V
or +5VDC
Power : +5V only operation
Power requirements : 30mA max
Operating temperature range : 0 to +70°C
Connectors
Jumper selectable serial port: TTL, RS-232
oder RS485 (BieneControl8535-485)
Serial Port : 2x5 pin IDC connector
Digital I/O Port : two 2x13 pin header (for
board-to-board connection)
2x13 pin header orientation - Down
I/O Port : terminal blocks for 4 Inputs and
4 Outputs
Programming Port: 2x5 pin header connectors
Power : terminal block for connection with
external Power Suplies
External Power Supply
Voltage Supply : +5VDC stabilized, 9VDC,
12VDC
Physical
Board Dimensions : 68x62mm
Weight :
Specifications
BieneOptoRelay8535
General
Number of Outputs : 7
Number of Inputs : 12
Power : +9V...+12VDC; +5VDC
Power requirements : 300mA max (all relays
active)
Operating temperature range : 0 to +70°C
Output Relay
Number of Outputs : 7 channels
Indication Mode : All outputs have LED
to visualize relay state
Logic "1" : green LED On and Relay On
Logic "0" : green LED Off and Relay
Off
Relay-type : Electromechanical DIP Relay
Relay Output : SPDT (with NO and NC contacts)
Maximum Switching Voltage : 120VAC; 24VDC
Max load : 24 VDC / 1 A; 120 VAC / 0.5
A
Maximum Switching Current : 1A
Isolation : 400 VAC or DC
Input
Number of Inputs : up to 12 Optoisolated digital
inputs or up to 12 non-isolated inputs (jamper
select)
Isolated
Inputs (Optoisolated input mode)
Number of Inputs : 12 channels
Indication Mode : All inputs have LED to
visualize inputs state
Logic "1" : LED On (red)
Logic "0" : LED Off
Isolation Voltage Input :
VIL : <0.8VDC,
VIH : Between +2VDC and +12VDC (without external
limited resistor),
Iinp : 30mA max (540/270om on-board limited resistor)
Isolation Voltage : 3750V (peak)
Protection : Reverse-polarity protection
Non-isolated Inputs (Non-optoisolated input mode)
Number of Inputs : 12 channels
Indication Mode : Logic "1" :
LED Off; Logic "0" : LED On
Voltage Input : Logic "1" : VIH;
Logic "0" : VIL
Voltage Input : VIL : <0.6VDC; VIH : Between
+3VDC and +5VDC
Protection : No
Connectors
Control : two 2x13-pin socket (for connection
with BieneControl)
Input/Output : Screw terminal blocks (12x2
for inputs and 7x3 for outputs)
Power : Screw terminal block
Physical
Board Dimensions : 98x148 mm
Weight :
Applications:
Lab experiments, Motor controls, Alarm systems,
Robotic Controls, Vending Machines, Temperature
Controls, General purpose industrial and displaying
applications.
|
;newWindow.focus()){kind=link}
;newWindow.focus()){kind=link}